Mr-Glass Window Replacement Nationwide

Mr-Glass Window Replacement: The San Diego Owner’s Guide

If you have a Mr-Glass window with a failed part, Westlight Windows San Diego stocks and installs Mr-Glass-compatible replacement components, with most single-window part replacements in San Diego running $220 – $480 installed depending on the part and your window’s series. The most common call we get is for a window that won’t close, a crank that spins without moving the sash, or a seal that has gone foggy between the panes. Most owners discover the failure the hard way: a room that won’t hold temperature, a lock that no longer engages, or a window that suddenly drops when you let go.

Call (619) 793-3829

We’re an independent San Diego window replacement company, not affiliated with Mr-Glass corporate. That matters because we’re not pushing one brand’s parts; we match what your window actually needs, whether that’s an OEM Mr-Glass component or a quality aftermarket equivalent that fits the same opening and performs just as well.

Which Mr-Glass Models This Applies To

Mr-Glass builds windows across several series lines, and the part your window needs depends on which series you have. The two most common we see in San Diego homes are the Mr-Glass 4500 single-hung and the 7200 horizontal slider, both of which use a proprietary balance system inside the frame. Here’s the compatibility gotcha most people run into: Mr-Glass balance cartridges look nearly identical across series, but the 4500 uses a 5/8-inch cartridge while the 7200 uses a 3/4-inch cartridge. Installing the wrong width means the window will bind or drop within weeks. We measure before we order, every time.

To identify your model, look for the etched label in the corner of the glass or on the frame edge. It’ll list the series number and sometimes the manufacture date. If the label’s worn off, we can still match it by measuring the glass thickness (Mr-Glass uses 7/8-inch insulated glass in most double-pane units) and the balance shoe profile. For older Mr-Glass windows from the mid-2000s and earlier, OEM parts are often discontinued. In those cases, we use aftermarket equivalents from Spring Window Fashions and AmesburyTruth that are dimensionally identical and carry a longer warranty than the original parts did.

Signs Your Mr-Glass Window Replacement Is Failing

• The window drops when you let go. That’s a worn balance cartridge. The spring inside has lost tension, and in a Mr-Glass single-hung, that means the full sash weight is now unsupported, which will eventually bend the frame track.
• The crank spins but the window doesn’t move. The operator gear has stripped. We see this most often on Mr-Glass casement windows in coastal San Diego neighborhoods like Point Loma and La Jolla where salt air accelerates the wear on the gear teeth.
• The glass is foggy between the panes. The insulated glass unit seal has failed. Once moisture gets between the panes, the argon or krypton fill is gone and the window’s energy efficiency drops by roughly 30 percent. This is a glass replacement, not a window replacement, and it’s the most common Mr-Glass parts job we do in San Diego.
• The lock or latch won’t catch. The sash has shifted, usually because a balance cartridge is wearing unevenly. Forcing the lock just bends the keeper and makes the problem worse.
• There’s a visible gap at the bottom when closed. That means the sash has settled past the weatherstripping. In San Diego’s marine layer mornings, that gap is where the damp air gets in, and where your air conditioning gets out.

Replacement Cost & What’s Included

Here’s what you’re looking at for Mr-Glass window replacement parts in San Diego, installed:

• Balance cartridge replacement: $180 – $260 per window, parts and labor included
• Operator crank replacement (casement): $220 – $340 per window
• Insulated glass unit replacement (foggy glass): $280 – $480 per window, depending on size and low-e coating
• Lock and latch replacement: $80 – $140 per window

What drives the range: window size, whether your Mr-Glass series is still in production, and whether the glass needs a custom cut (anything over 36 inches in either direction usually does). You get a written price before any work starts, and that price doesn’t change at the door. Every parts replacement we install carries our 365-Day Done Right Promise: if it’s not right within a year, we return and fix it at no charge. No re-negotiation, no shipping fees passed back to you.

DIY or Call Us?

Here’s the honest split. You can absolutely check the label to confirm your Mr-Glass series, take a photo of the failed part, and measure the visible glass dimensions for us over the phone. That saves you nothing but time, and it helps us arrive with the right part on the truck.

What you don’t want to do yourself is pull a balance cartridge from the frame. Those springs are under constant tension; we’ve had San Diego homeowners release them wrong and end up with a broken window pane and a damaged track, which turns a $220 part into a $500 job. Same caution applies to removing an insulated glass unit: the glazing bead on Mr-Glass frames is snug, and without the right tool you’ll chip the frame edge. Our technicians are background-checked and uniformed, and every job carries the Kingswell Guarantee: a written price before work begins, a real arrival window, a clean job site, and a written guarantee on the completed work. Call us at (619) 793-3829 and we’ll walk you through what you’re looking at before we ever schedule the truck.

FAQs